Equipment Guide

HomeNews Equipment Guide How Can Factories Transfer Drums from Pallets to Production Workstations Safely?

How Can Factories Transfer Drums from Pallets to Production Workstations Safely?

2026-11-12

Factories can transfer drums from pallets to production workstations by using compatible drum lifting equipment, preparing a clear transport route, securing the container, and controlling every lifting and lowering movement. The process should follow the equipment manufacturer's operating instructions.

Why Is Moving Drums from Pallets a Difficult Warehouse Task?

Many factories receive oils, lubricants, coatings, cleaning liquids, and chemical materials in drums.

These containers are frequently delivered on pallets and then moved to production preparation areas.

The challenge begins when individual drums need to be removed from a pallet.

Unlike cartons, drums have rounded surfaces that can roll, shift, or become unstable during manual handling. Filled containers can also be heavy, making manual lifting and repositioning difficult.

Common problems include:

  • Uncontrolled drum rolling.

  • Difficult access to individual drums on pallets.

  • Insufficient clearance around storage areas.

  • Unstable lifting positions.

  • Repeated manual handling.

  • Incorrect equipment selection.

  • Limited access to production workstations.

A dedicated transfer process helps reduce unnecessary handling and keeps the movement of industrial materials more organized.

What Should Be Checked Before Moving a Drum?

Before starting the transfer, the operator and warehouse supervisor should confirm the drum specifications and the destination requirements.

CheckImportant Details
Drum MaterialSteel, plastic, or fiber
Drum DimensionsDiameter and height
Filled WeightMaximum actual load
Rim StructureCompatibility with gripping equipment
Pallet ConditionStability and accessibility
Lifting HeightRequired workstation or placement height
Transport RouteDistance, aisle width, and floor condition
DestinationStable floor or designated production position

The filled weight is especially important.

An empty drum may be relatively easy to move, but the same container filled with oil or chemical material can require substantially different equipment.

Which Equipment Is Suitable for Pallet-to-Workstation Drum Transfer?

A hydraulic drum lifter is commonly used when individual drums need to be removed from pallets and positioned at a different working height.

A semi-electric drum lifter can be considered when lifting operations are frequent and reduced manual pumping is important.

The main options include:

Hydraulic Drum Lifter

A hydraulic drum lifter uses a gripping mechanism and hydraulic system to raise and position compatible drums.

It is suitable for transferring drums between pallets, storage areas, and production workstations.

NEUNE's Hydraulic Drum Lifter offers different lifting height configurations for industrial handling applications.

Semi-Electric Drum Lifter

A semi-electric drum lifter uses powered lifting to reduce repeated manual pumping.

It can be useful in production areas where operators regularly transfer drums between storage and material preparation points.

See NEUNE's Semi Electric Drum Lifter Trolley for a powered lifting option.

Oil Drum Truck

An oil drum truck is designed for supporting and moving compatible drums over shorter distances.

It is more suitable for floor-level drum movement than for transferring drums to elevated workstations.

NEUNE also offers an Oil Drum Truck for industrial barrel transportation.

The key difference is the required movement. A truck that supports horizontal transportation does not automatically provide the lifting height or gripping function needed for pallet-to-workstation transfer.

How Should Factories Transfer Drums from Pallets to Production Areas?

The following workflow provides a practical reference. Actual procedures must follow the selected equipment's operating manual.

Step 1: Prepare the Transport Route

Clear the route between the pallet storage area and the production workstation.

Remove unnecessary materials, check floor conditions, and make sure there is sufficient turning space.

The receiving position should also be ready before the drum is lifted.

Step 2: Inspect the Drum and Equipment

Check the drum for visible damage, leakage, deformation, or an unsuitable gripping surface.

Inspect the lifter's frame, clamp, wheels, and hydraulic components.

A damaged drum or defective lifting mechanism should not be used for normal transfer operations.

Step 3: Position the Lifter Correctly

Move the equipment into the approved pickup position.

The gripping structure must be compatible with the drum and positioned according to the manufacturer's instructions.

The equipment should not be forced into a position where the pallet or surrounding containers prevent proper engagement.

Step 4: Secure the Drum

Engage the gripping mechanism and confirm that the drum is properly supported.

The operator should verify that the clamp has engaged the intended lifting point before raising the container.

Step 5: Lift the Drum Under Control

Raise the drum gradually using the designated hydraulic or electric lifting control.

Only the lifting height required for safe clearance and transportation should be used.

Sudden lifting movements can cause unnecessary load movement.

Step 6: Transport the Drum

Move along the prepared route at a controlled speed.

Avoid abrupt turning, uneven floor sections, and unnecessary movement with the drum raised.

Pedestrian access should be restricted around the active transfer area.

Step 7: Position and Lower the Drum

Approach the workstation and align the drum with the designated receiving position.

Lower the container gradually until it is fully supported by the intended surface or equipment.

Only release the gripping mechanism after the drum is stable.

How Can Factories Reduce Repeated Drum Handling?

The biggest workflow improvement often comes from reducing the number of times a drum needs to be repositioned.

A poorly organized process may require workers to move a drum from a receiving pallet to temporary storage, then to another pallet, and finally to the production area.

Every additional transfer creates more handling work and more opportunities for instability or damage.

A better approach is to plan the material route in advance.

For example:

Receiving Area → Drum Storage → Material Preparation → Production Workstation

Where the layout allows, compatible drum lifting equipment can transfer containers directly between these points.

Factories should also consider placing frequently used materials closer to their production areas, provided storage, fire protection, and chemical segregation requirements are maintained.

What Mistakes Should Operators Avoid During Drum Transfer?

Several practices can create unnecessary risks.

Do Not Roll Filled Drums Across the Floor

Rolling may be unsuitable for certain drum types and contents. Use equipment designed for the intended handling task.

Do Not Use Ordinary Pallet Truck Forks as Drum Supports

Standard pallet truck forks are designed for pallets, not for directly gripping cylindrical drums.

Do Not Lift Beyond the Rated Capacity

The maximum filled drum weight must remain within the equipment's permitted capacity.

Do Not Use an Incompatible Clamp

A gripping mechanism must match the drum's rim and construction.

Do Not Move Unstable Drums

Damaged, leaking, or poorly supported containers require appropriate assessment before handling.

Do Not Use a Lifter for Unauthorized Rotation

A lifting trolley should not be used for pouring or rotating drums unless that function is specifically included in its design.

What Should Procurement Teams Include in a Drum Lifter RFQ?

For factories and industrial equipment distributors, a complete inquiry helps prevent incorrect equipment recommendations.

RFQ DetailInformation Required
Drum MaterialSteel, plastic, or fiber
Drum SizeDiameter and height
Filled WeightMaximum load
Rim DesignUpper rim and gripping compatibility
Pickup PositionFloor or pallet
Required Lift HeightWorkstation or storage height
Transfer DistanceApproximate route
Handling FrequencyDrums per shift or day
Equipment TypeManual hydraulic or semi-electric
Order QuantitySample or bulk requirement

Providing photographs of the drums and pallet arrangement can also help suppliers understand the actual handling conditions.

Plan Industrial Drum Transfer with NEUNE

NEUNE supplies drum lifting and transportation equipment for factories, warehouses, chemical storage facilities, and production environments.

Its Drum Handling Equipment range includes hydraulic drum lifters, semi-electric drum lifters, and drum transportation products.

For factories handling drums from pallet storage to production stations, NEUNE can review the container dimensions, maximum filled weight, required lifting height, and operating frequency to help identify a suitable configuration.

Send the application details through the NEUNE inquiry page to discuss product specifications and bulk supply requirements.